English l Español 
   
Product: Datasys 8
 

 

  Features

• Friendly and easy-to-use monitoring software.
• Eight (8) channel, simultaneous data acquisition.
• Vibration and sound level real time analysis.
• Envelope analysis.
• Low frequency measurements.
• On-Site Expert Analysis.
• Fractional-Octave analysis.
• Frequency analysis – Baseband and zoom FFT.
• Waveform Acquisition.
• Power Spectrum.
• Power Spectral Density (PSD).
• Order Analysis: for variable speed equipment.
• Orbital Analysis.
• Cross Spectrum.
• Wizard Module for Dynamic Balancing: One Plane With/Without Phase, Two Planes.
• Post-Processing Module: Several Analysis from one Measurement (routine time saving).
• Run up/ Coast down.
• Integrated signal conditioning.
• Ideal for high-channel-count data acquisition applications.

 

 

 
Overview

MTI is proud to introduce the DATASYST Portable data collector and machine condition monitoring analyzer. The “Datasys 8” version is part of the six generation MTI´s Off-Line Data collectors, a complete range of monitoring solutions.

The “Datasys 8” is a rugged, multi-channel that monitors and analyze the machine condition. This easy-to-use data collector includes sound, vibration and ultrasound analysis, motor current, pressure, temperature and process parameter monitoring.

The “Datasys 8” employs the latest technology in PC component, designed to resists extremely harsh environmental conditions. The instrument also comprises the latest advances in analog and digital electronics including 16-bit digital signal processing (DSP), 1.25 GS/s sampling rate and an A/D converter to provide the fastest and the most accurate multiplexed data acquisition.
Also includes improved FFT resolution, using differential frequency ranges instead of traditional number of lines. This feature increases spectrum resolution many times than other data collectors.

Characteristics Datasys 8

Portable Data Collector, capable of recording 8 simultaneous channels coming from multiple sensor types: Piezoelectric Accelerometers (ICP [mv/g] or passive [pC/ms2]), Triaxial, Eddy Current Proximity Probe, Tachometers, Amperometric Clamps, Ultra Low Frecuency Accelerometers, and a variety of other sensors. Simultaneous Acquisition: enables to compare spectra under the same operating conditions. Multiple Plane on-site Balancing Software.
 Specifications
 General
Processor:
Intel Atom N450 Single Core 1.66
Chipset: Intel® AtomT N450/D510+ICH8M
Memory: 2GB DDR3
Hard Disk: 160GB SSD
Battery:

2 Internal Smart Li Ion Battery 14.4 V 6.8AH 98W (More than 10 hours battery).

User Indicators: Battery LED Status
Power Adapter: AC Power Input:100v ~ 240V, 50Hz ~ 60Hz, Output 19V, 3.4A
I/O Port: 2 USB 2.0 Connectors,1 RJ45 10/100/1000 Mbps Ethernet Connector
Sampling Rate: 65Ks/s per channel
Anti-Aliasing Filter: Analogic and digital Filtering
Dynamic Range: 110 dBfs (two tone test, 100 linear averages)
Overall Accuracy : Amplitude: ± 0.15dB (1 KHz, fullscale)Frecuency: ± Within 0.01%
Signal-to-noise: >95dB (From DC to 1KHz measured with half-fullscale sine wave)
Frequency Resolution: From 0.062 Hz to 512 Hz
Windows: Rectangular, Hanning, Hamming, Blackman-Harris, Low Side Lobe, Flap top
Averaging Mode: Vector, RMS, Peak Hold
Weighting Mode: Linear, Exponential
Triggering: Start/End for all ch, Signal level (Falling Edge, Rising Edge), Time (S, M, H, D, etc), TTL Levels (digital) and Manual.
Integrators: One or two integrations (Velocity and Displacement)
 Environment
Ingess Protection:
IP67 . MIL C-4150J .(Dust- and waterproof)
Temperature Ratings :

Operating Temperature: -10ºC~70ºC (Internal)
Storage Temperature: -200ºC~85ºC

Operating Humidity: 10%~90%
Vibration: Meet Mil. Std 810E-514.4 I Cat. 10, Fig. 16. Unit is non-operating ASTM4169 truck transport, 11.5.2 Random test, Assurance level II.
Optional EX Version: ATEX II 1D T4
 Enclousure
Size:
Height: 14.62 in. (371 mm)
Width: 10.18 in (258 mm)
Depth: 6 in (152 mm)
Aprox.Weight: 6.5 kg (14.3 lb.)
Display: 15" SVGA LCD Led BL(1024x768 Scr. Res.)
 
 
     ® Measurement Technologies Inc.