 |
|
|
| Features |
|
• Friendly and easy-to-use monitoring software
• Four (4) channel, simultaneous data acquisition
• Single, dual & triaxial accelerometer + tachometer input
• Vibration and sound level real time analysis
• Envelope analysis
• Low frequency measurements
• On-Site Expert Analysis
• Fractional-Octave analysis
• Frequency analysis - Baseband and zoom FFT
• Waveform Acquisition
• Power Spectrum
• Power Spectral Density (PSD)
• Order Analysis: for variable speed equipment
• Orbital Analysis
• Cross Spectrum.
• Wizard Module for Dynamic Balancing: One Plan With/Without Phase, Two Planes.
• Post-Processing Module: Several Analysis from o
Measurement (routine time saving).
|
|
|
|
| |
|
|
| |
| MTI
is proud to introduce the DATASYS™ Portable data collector
and machine condition monitoring analyzer. The DATASYS 4 version
is part of the six generation MTI´s Off-Line Data collectors, a
complete range of monitoring solutions.
The DATASYS 4 is a rugged, lightweight,
multi-channel that monitors and analyze the machine condition.
This easy-to-use data collector includes sound, vibration and
ultrasound analysis, motor current, pressure, temperature and
process parameter monitoring.
The DATASYS 4 employs the latest technology
in PC component, designed to resists extremely harsh environmental
conditions and to moves easily from the field work to the office.
The instrument also comprises the latest advances in analog and
digital electronics including 16-bit digital signal processing
(DSP), 400 kS/s sampling rate and an A/D converter to provide the fastest
and the most accurate multiplexed data acquisition.
Also includes improved FFT
resolution, using differential frequency ranges instead
of traditional number of lines. This feature increases spectrum
resolution many times than other data collectors.
Portable Data Collector, capable of recording 4
simultaneous channels coming from multiple sensor types: Piezoelectric
Accelerometers (ICP [mv/g] or passive [pC/ms2]), Triaxial, Eddy Current
Proximity Probe, Tachometers, Amperometric Clamps, Ultra Low Frecuency
Accelerometers, and a variety of other sensors. Simultaneous Acquisition:
enables to compare spectra under the same operating conditions.
Multiple Plane on-site Balancing Software.
|
|
| Specifications |
Processor
|
Intel® AtomT Processor N450/D510 1.67 GHz |
| Chipset |
Intel® AtomT N450/D510+ICH8M |
| Memory |
DDR2 667 MHz 1GB |
| Hard Disk |
CF III Extended Temperature - 16Gb |
| Display |
8.4" SVGA TFT LED |
| Pointing Device |
Digitizer |
| Battery |
• Smart Lithium-Ion with 6x cells,
(6800mAh, 14.4V, 98W)
• 6½ hrs battery life |
| Communication |
• Internal 10/100/1000 Base-T Ethernet LAN
• Wireless LAN 802.11n (Option) |
| I/O Port |
• Two USB2.0 connectors
• RJ-45 jack for
internal 10/100/1000 Base-T Ethernet LAN
• DC-In jack |
| Power Adapter |
AC power input: 100V ~ 240V, 50Hz~60Hz,
60W, output: 19V |
| LED Status Indicator |
• Power On: Green (when system active)
• Battery: Blue Blinking (when the battery is in use), Orange Blinking (when battery
is charging).
• HDD: Red (when HDD is accessing)
|
| Dimension |
9.76"(W) x 10.63"(H) x 2.52 in"(D)
4.85 lb |
| Environment |
• Ingress Protection:IP 65 to EN 60529.
NEMA 12 (Dust- and waterproof)
• Operating Temperature:-10ºC~70ºC (internal)
• Storage Temperature:-20°C~ 85ºC
• Operating Humidity:10% ~ 90%
|
| Security |
Kensington Lock, Administrator password,
Boot password |
| EMI/Safety |
UL, FCC, CE, TUV |
| Drop Specification |
26 drops of 36 inches to plywood over concrete
with unit off. Mil. Std 810E-516.4 IV |
| Water Sealing |
Rain chamber to operate at no less than
40 PSIG and no less than 1 in/hr. 10 min. per axis, 6
axes, units is non-operating. Mil. Std 810E-506.4 procedure
II. Similar to IPX4. |
| Vibration |
Meet Mil. Std 810E-514.4 I Cat. 10, Fig. 16. Unit is
non-operating ASTM4169 truck transport, 11.5.2 Random
test, Assurance level II. |
| Dust Proof |
Meet IEC 60529 IP-6X standard, Protected
against dust, limited ingress (no harmful deposit) |
| Input |
• 1,2 and 3: accelerometer or User defined DC Input channels (A/MC)
• 4 : Low Frequency accelerometer and User defined DC Input(UDC) |
| Frequency Range |
• DC to 15 kHz |
| Voltage Range |
• 1,2 and 3: ± 5 Vpeak for accelerometers and 10 Vpeak for User defined DC Input
•
4: ± 10 Vpeak for User defined DC Input |
| Signal Conditioning |
• ICP®,Unpowered or Voltage supply sensor |
| Sampling Rate |
• 32 kS/s per channel |
| Integrators |
• One or two integrations (Velocity
and Displacement) |
| Anti-Aliasing Filter |
• Analogic and digital filtering |
| Dynamic Range |
• 110 dBfs (two tone test, 100 linear
averages) |
| Overall Accuracy |
• Amplitude: ± 0.15 dB (1
kHz, full scale)
• Frequency: ± Within
0.01% |
| Signal-to-noise |
• >95dB (from DC to 1kHz measured
with half-fullscale sine wave) |
| Frequency Resolution |
• From 0.062 Hz to 512 Hz |
| Windows |
• Rectangular, Hanning, Hamming,
Blacman-Harris, Low Side Lobe, Flap top |
| Averaging Mode |
• Vector
• RMS
•
Paek Hold |
| Weighting Mode |
• Linear
• Exponential |
|
|
| |
 |
| |
|
